Stage Sound & Lighting

Equipment Specifications
Apex engineers and designers are the best in the business collectively over 200 years experience.
They are a premium Speaker Manufacture in business for over 40 years.
Apex Architectural Speakers Enclosures
Apex AASE 2 X 15 Enclosures
High Horn
COMPRESSION DRIVER PSD:2002
Throat Size 1", 25.4mm
Impedance 8 ohms or 16 ohms
Power Ratings: 80Wrms
(EIA426B specification, 1.6kHz @ 18dB) 550Hz
Resonance 1.5kHz - 20kHz
Usable Frequency Range
Sensitivity (1W @1m on axis on horn) 105dB
Magnet Weight 34oz.
Voice Coil Diameter 2", 51mm
Voice Coil Former DuPont Kapton
Diaphragm Material Titanium
 
P.AUDIO BM15CX38 For Mid High and in Monitors
Monitors


General Specifications

Nominal Diameter 380 mm (15.0 inch)
Rated impedance 8 Ohm
Power Handling Capacity 600 W
Sensitivity 2.83 V, 1M 98 dB
Effective Piston Diameter 325 mm (12.8 inch)
Voice Coil Diameter 99.30 mm (4 inch)
Thiele & Small Parameters
Resonance Frequency FS 42.9 Hz
DC Resistance Re 6.9 Ohm
Mechanical Q Factor Qms 8.403
Electrical Q Factor Qes 0.322
Total Q Factor Qts 0.310
BL Factor BL 19.87 T x m
Effective Moving Mass Mms 68.33 g
Equivalent Cas air load Effective piston area
Vas Sd 2 196.50 liters 0.0830 m
Voice -coil inductance@ 1KHz Le 1k 1.05 mH
Half -space efficiency Eff 4.67 %
Airgap Height Hag 8.0 mm
Voice coil Height Hvc 17.0 mm
Voice Coil Over -Hung Xmax 4.5 mm
HF Unit
Power Capacity (RMS) 100 W
Sensitivity 1W / 1M 109 dB
Frequency Range 500 -18K Hz
Voice coil Diameter 72.2 mm 2.84 inch
Diaphragm Material Titanium
Dispersion Pattern 90 x 90

 
Low Mid

General Specifications C15-600EL
Nominal Diameter 385 mm (15.2 inch)
Rated impedance 8 Ohm
Power Handling Capacity 600 W
Sensitivity 2.83 V, 1M 97.1 dB
Effective Piston Diameter 325 mm (12.8 inch)
Voice Coil Diameter 99.30 mm (3.9 inch)
Basket Cast Aluminum
Magnet type,size ODxIDxH(mm) Ferrite
96.6 oz 200 x 110 x 25 mm
Voice coil Former Fiber Glass
Voice coil Material ALR
Cone Material Pulp Paper
Surround Treated Cloth
Dust Cap Pulp Paper
Unit Weight 10.37 Kg Gross Weight 11.90 Kg

 
Apex MTL 2 X 18 Enclosures Lows

OMEGA PRO 18 high power bass

Nominal Basket Diameter 18", 457.2mm
Impedance 8 ohms
Power Rating 800Wrms
Resonance 28Hz
Usable Frequency Range 25Hz - 2kHz
Magnet Weight 109oz.
Gap Height 0.375", 9.52mm
Voice Coil Diameter 4.0", 101.6mm

SSL Speakers
SSL FLC 2 X 12 With JBL 2446 Horn
SSL FLC 2 X 12 With JBL 2446 Horn
JBL 2445 Horn
JBL 2445 Horn
100 watts continuous program
at 500 Hz
150 watts continuous program at
1 kHz and higher
Coherent Wave™ phasing plug design
for increased high-frequency output
100 mm (4 in) pure titanium diaphragm
with radial-rib topology
and patented three-dimensional
diamond pattern suspension
100 mm (4 in) edgewound
aluminum voice coil
49 mm (2 in) throat exit diameter
100 watts continuous program
at 500 Hz
150 watts continuous program at
1 kHz and higher
Coherent Wave™ phasing plug design
for increased high-frequency output
100 mm (4 in) pure titanium diaphragm
with radial-rib topology
and patented three-dimensional
diamond pattern suspension
100 mm (4 in) edgewound
aluminum voice coil
49 mm (2 in) throat exit diameter
1201-8 Ohm BW Low Frequency Driver
1208-8 SPS BWX Low Frequency Driver
Impedance: 8 Ohms
Power capacity: 1400 W Peak,
700 W Program, 350 W Continuous
Sensitivity: 98.5 dB / 1 W 1 m
Usable freq. range: 60 Hz ~ 3.5 kHz
Cone: Kevlar® impregnated cellulose
Voice coil diameter: 4.0 inch / 100 mm
Voice coil material: Aluminum ribbon wire,
Polyimide-impregnated fiberglass former, Nomex® stiffener,
Solderless diffusion welded OFHC copper leads
Impedance: 8 Ohms
Power capacity: 2000 W Peak,
1000 W Program, 500 W Continuous
Sensitivity: 96.9 dB / 1 W 1 m
Usable freq. range: 50 Hz ~ 3.5 kHz
Cone: Kevlar® impregnated cellulose
Voice coil diameter: 4.0 inch / 100 mm
Voice coil material: Aluminum ribbon wire, Polyimide-impregnated fiberglass former, Nomex® stiffener, Solderless diffusion welded OFHC copper leads
   
SSL FLCM 2 X 15 With 22XT Horn Mid
SSL FLCL 2 X 15 With 22XT Horn Low
22XT Horn
22XT Horn
Patented titanium compression driver with 1 inch throat diameter
Ferrofluid cooled
Frequency response: 500 Hz - 20 kHz
Impedance: 8 Ohms
Mounts directly to all Peavey CH® horns with a 1 inch throat
Patented titanium compression driver with 1 inch throat diameter
Ferrofluid cooled
Frequency response: 500 Hz - 20 kHz
Impedance: 8 Ohms
Mounts directly to all Peavey CH® horns with a 1 inch throat
1502-8 DT BW Low Frequency Driver
15" Low Rider® Subwoofer
Impedance: 8 Ohms
Power capacity: 1400 W Peak,
700 W Program, 350 W Continuous
Sensitivity: 98.9 dB / 1 W 1 m
Usable freq. range: 40 Hz ~ 2 kHz
Cone: Kevlar® impregnated cellulose
Voice coil diameter: 4.0 inch / 100 mm
Voice coil material: Aluminum ribbon wire, Polyimide-impregnated fiberglass former, Nomex® stiffener,
Solderless diffusion welded OFHC copper leads

Impedance: 8 ohms
Power capacity: 3200 watts peak,
1600 watts program, 800 watts continuous
Sensitivity: 93.6 dB
Usable freq. range: 30 Hz - 1 kHz
Cone: Kevlar® impregnated cellulose
Voice coil diameter: 4.0 inch / 100 mm
Voice coil material: Polyimide coated copper ribbon wire, Polyimide-impregnated fiberglass former, Nomex® stiffener, Solderless diffusion welded OFHC copper leads
   
SSL FLS 2 X 18
18" Low Rider® Subwoofer

Field-replaceable basket
Kevlar®-impregnated cones for increased strength
Lower distortion due to greater dampening of excess cone vibrations
Polyimide-impregnated fiberglass former for higher sensitivity and frequency response
Die-cast aluminum frame
Higher power handling 4-inch diameter edge-wound voice coil
Impedance: 8 ohms
Power capacity: 3200 watts peak, 1600 watts program, 800 watts continuous
Sensitivity: 97.3 dB Usable freq. range: 25 Hz - 1 kHz
Cone: Kevlar® impregnated cellulose
Voice coil diameter: 4.0 inch / 100 mm Voice coil
material: Polyimide coated copperribbon wire Polyimide-impregnated fiberglass former Nomex® stiffener
Solderless diffusion welded OFHC copper leads
Monitors
   
1545 Wedge
Q-Wave Monitor

Two-way, full-range floor monitor
One 15 inch BWX Black Widow® woofer with Kevlar®/carbon fiber cone and field-replaceable basket, flat-wound voice coil and cast-frame basket
RX™ 22 compression driver with ferrofluid cooling and a 2 inch titanium diaphragm
Sound Guard™ HF driver protection circuit
Frequency response: 100 Hz - 14 kHz
-10 dB cutoff: 66 Hz Sensitivity: 99 dB (1W/1m)
Power handling: 1000 Watts program, 2000 Watts peak
8 Ohms Neutrik® full-range jack
30 or 45 degree baffle angle Baltic birch enclosure
New grille 45 degree baffle orientation: 15.63" H x 24.00" W x 17.75" D 30 degree baffle orientation: 15.25" H x 24.00" W x 17.75" D

Power handling:
Full range:

1,000 Watts continuous
2,000 Watts program
4,000 Watts peak
Low frequency section:
500 Watts continuous
1,000 Watts program
2,000 Watts peak
High frequency section:
100 Watts continuous
200 Watts program
400 Watts peak
Roland JC120
When the original JC-120 Jazz Chorus amp was introduced in 1975, its most obvious cosmetic distinction was its silver-cone speakers. And now these classic silver-cone speakers are back, giving the JC-120 the legendary clean amp sound found on countless records over the years. With the JC-120's lush chorus effects, dual-amp design and high-quality reverb, the "sound" is undeniable! 120 watts (60+60 stereo) and two 12" speakers.
Frount of House Monitor Consol
View
3204 Yamaha 32 X 4 X 2
Specifications pdf
View
3204M Yamaha 32 X 10 X 2
Specifications pdf
View
Yamaha MG32-14FX 32-Input 14 Bus Mixer
Specifications pdf
View
SRM-2410 HC" 24 x 10 Monitor Console Specifications pdf